home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Shareware Overload Trio 2
/
Shareware Overload Trio Volume 2 (Chestnut CD-ROM).ISO
/
dir39
/
386to486.zip
/
MUSTREAD.NOW
< prev
next >
Wrap
Text File
|
1992-07-31
|
6KB
|
114 lines
█▀█ █ █▀▀█ █ █ ▀█▀ ▀▀█▀▀
█▀▀█ █ █ █ █▀▀█ █ █
▀▀▀▀ ▀▀▀▀ ▀▀▀▀ ▀ ▀ ▀▀▀ ▀
▀█▀ █▀▀█ █▀▀█ █▀▀█ █ █ █▀▀█ ▀▀█▀▀ ▀█▀ █▀▀█ █▀▀█ █▀▀▀
█ █ █ █ █ █ █ █ █ █▀▀█ █ █ █ █ █ █ ▀▀▀█
▀▀▀ ▀ ▀ ▀ ▀ ▀▀▀▀ ▀▀ ▀ ▀ ▀ ▀▀▀ ▀▀▀▀ ▀ ▀ ▀▀▀▀
█▀▀▀ █ █ █▀▀█ █▀█ █▀▀▀ █ █ █ █▀▀█ █▀█ █▀▀▀
▀▀▀█ █▀▀█ █▀▀█ █▀▀█ █▀ █ █ █ █▀▀█ █▀▀█ █▀
▀▀▀▀ ▀ ▀ ▀ ▀ ▀ ▀ ▀▀▀▀ ▀▀▀▀▀ ▀ ▀ ▀ ▀ ▀▀▀▀
▄█ █▀▀█ █▀▀█ ▀▀▀█
█ ▀▀▀█ ▀▀▀█ ▀▀█
▀▀▀ ▀▀▀▀ ▀▀▀▀ ▀▀▀▀
──╖ ┌──┐ ╓── ╖ │ ┌──┐ ╓──
║ │ │ ║ ──╫── │ ║ │ │ ║
──╢ ╟──╢ ╟──┐ ║ ╓──┐ └──╢ ╟──╢ ╟──┐
║ ║ ║ ║ │ ║ ║ │ ║ ║ ║ ║ │
──╜ ╙──╜ ╙──┘ ╙── ╙──┘ ╨ ╙──╜ ╙──┘
╓─┐ ╖
║ ╓─┐ ┬─╖ ╖ ┌ ╓┐ ╥─ ─╫─ ╓┐ ╥─
╙─┘ ╙─┘ ┴ ╨ ╚═╛ ╙─┘ ╨ ╙─ ╙─┘ ╨
----------------------------------------------------------------------------
SYSTEM REQUIREMENTS TO RUN THIS PROGRAM:
o A 386 DX CPU with at least 1 MEG of Extended memory.
o HIMEM.SYS / QEMM or any other EMM manager.
o DOS 3.x or higher and/or Windows 3.1 (optional)
Welcome to a FIRST in PC TECHNOLOGY. Your computer is capable of
doing much more than you think, and the companies that make them
don't tell you everything. Well WE WILL. What if we told
you that there is a program that converts your 386 DX into a
real 486 DX/2 66 MHZ! You would say it's impossible, or it's
another one of those HOAX PROGRAMS. Well you are wrong. In fact
there are many programs out there that CLAIM to SPEED-UP your computer
or increase your memory, but do they REALLY give results ? They
either eat memory, behave strangely, and the result is not significant.
Well throw away all those programs, because 386TO486.COM is the
right choice. Yes, this little program, under 22 K, will convert
your 386 DX into a 486 DX/2 66 MHZ, SAFELY.
This program only works with 386 DX's, it does not support SX or 286
computers.
Now you might seem skeptic and think this is a joke. This program
took 6 months to program, and was carefully studied by top notch
programmers and debuggers. They have come up with a SAFE
technique to do so.
We will not go into technical details, but we will attempt to explain.
What this program does, is, it adds a mini TSR program into
a protected memory area and this RESIDENT program acts as a CPU,
it analyses the program being run and takes over the work, does
its own calculations, compresses the program in memory, changes
certain commands, all in realtime! All this frees up your
regular CPU. So your regular CPU does its chores and the
EMULATED CPU does its work too. It's like having a math co-processor,
but in this case it's a CPU co-processor.
And it's not all!!! This TSR does more than free the load out of
your CPU, it also features a graphic processor and sound processor.
2 independant built-in modules that take care of graphic manipulations
in all modes including CGA, EGA, VGA, SVGA, XVGA, and modes up to 24 bit
color. It's like having a seperate GRAPHIC CPU, so imagine all the
work load taken off your regular CPU. It also features a built-in
sound processor, that takes care of sound processing, for programs
that use sound cards and PC SPEAKER as well.
The program also features a MATH CO PROCESSOR emulator, even better
than Q387.EXE, it is as fast as the real math chip itself, this also
is installed.
So with all these utilities in memory (TSR) it works to help free your
CPU, it also changes your BIOS, setup and memory contents to configure
it into a 486 66 so other programs can recognise it.
When we say it converts it into a 486 66, we really mean it!!!
Your 386 DX 40 becomes 486 66 MHZ, tests have been made
and we measured the CPU speed with different programs.
Without this utility installed we got from 37.5 to 40 MHZ!
With the utility installed we got an amazing 67.2 MHZ to 74 MHZ!
Faster than the real 486 66 MHZ!!!
Everything is automatic and temporary, once you turn off your
computer everything is reset. When you run the program it will
read your configuration and adjust itself accordingly. This
utility takes away NO MEMORY, it resides in a special unused portion
of your memory, and it is fully compatible with ANY DOS version,
any WINDOWS version, any other TSR's in memory, other memory
managers, and 100% of all the programs out there.
So we hope you understand the principle around this, it uses
very complex programming code to acheive this. And it's more
than just an emulation, your system becomes a real 66 MHZ SYSTEM!
And you REALLY will notice the difference when you run graphic programs.
WARNING: Do not attempt to use this program if you have a 286 processor,
it won't work! Also if you have a 386 portable type of computer,
it might not work.
Feel free to distribute this program around, we hope you enjoy it!
End of document.